Heavy Pressure solvent cemented pipes as per IS : 4985 - 2000

Pipes are available in metric series ranging from 20mm to 50mm, in a standard length of 6 meters, plan at both the ends. These pipes are joined by use of solvent cement in which mating & fusion between the pipe & fitting takes place creating a homogeneous joint.

DIMENSION OF HEAVY PRESSURE SOLVENT CEMENT JOINTED PIPES

BLUE & WHITE THREADED PIPES
These pipes are threaded at both the ends with threads as per IS 554, BSPT. These Pi- pes can be used in combination with G.I. fittings readily available in the market

Advantages over conventional G.I. Piping systems

• Low transportation cost
• Ease of handing
• Lower material & Installation cost
• PVC-U Pipe has a smooth surface, which reduces pressure losses and thus conserves electrical energy.
• High corrosion resistance
• Durable. The solvent cement joints are leak proof and the joint is as strong as the parent material. The joints are tested under pressure as stipulated in the standard.
• The lengths can be cut to required measurement and joined easily without laborious threading operation.

DIMENSIONS OF ASTM HEAVY PRESSURE PIPES AT 23°C

(The compound used in the manufacture of pipes is Type 1, ie. Grade 1PVC 1120 as identified in ASTM D 1784 with spec- ified amount of pigment, stabilizers & other additives)

(All dimensions are in mm)

Available in Bellon type (Male / Female) threading in 25mm to 110mm sizes.